Touchpad - HP Chromebook 14 G5 Maintenance And Service Manual

TouchPad

NOTE: The TouchPad spare part kit does not include the TouchPad cable. The TouchPad cable is included in the
Cable Kit, spare part number L14330-001, and includes double-sided adhesive.
Description
TouchPad
Before removing the TouchPad, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the keyboard/top cover (see
Remove the TouchPad:
1. Release the shielding material (1) that covers the top edge of the TouchPad.
NOTE:
2. Remove the three Phillips M2.0×2.7 screws (3) that secure the TouchPad and TouchPad bracket to
the keyboard/top cover.
3. Remove the three Phillips M2.0×2.2 broad head screws (4) that secure the TouchPad to the keyboard/
top cover.
4. Remove the TouchPad bracket (5).
The TouchPad bracket is available using spare part number L18436-001.
26 Chapter 5 Removal and replacement procedures
The TouchPad shielding material is included in the Mylar Kit, spare part number L14346-001.
Keyboard/top cover on page
Spare part number
L14356-001
21).