Table of Contents
Advertisement
Right side
Item
(1)
(2)
(3)
(4)
(5)
6
Chapter 2 External component identification
Component
Audio-out (headphone)/Audio-in (microphone) jack
MicroSD memory card reader
USB 3.x SuperSpeed port
AC adapter and battery light
USB Type-C power connector and charging port
Description
Connects optional powered stereo speakers, headphones,
earbuds, a headset, or a television audio cable. Also connects an
optional headset microphone. This jack does not support
optional microphone-only devices.
WARNING!
To reduce the risk of personal injury, adjust
the volume before putting on headphones, earbuds, or
a headset.
NOTE:
When a device is connected to the jack, the computer
speakers are disabled.
NOTE:
Be sure that the device cable has 4-conductor
connector that supports both audio-out (headphone) and audio-
in (microphone).
Reads optional memory cards that store, manage, share, or
access information.
To insert a card:
1.
Hold the card label-side up, with connectors facing
the computer.
2.
Insert the card into the memory card reader, and then
press in on the card until it is firmly seated.
To remove a card:
Pull out the card.
▲
Connects a USB device, such as a cell phone, camera, activity
tracker, or smartwatch, and provides high-speed data transfer.
White: The AC adapter is connected and the battery
●
is charged.
Amber: The AC adapter is connected and the battery
●
is charging.
●
Off: The computer is using battery power.
Connects an AC adapter that has a USB Type-C connector,
supplying power to the computer and, if needed, charging the
computer battery.
Advertisement
Table of Contents
