Fan - HP Pavilion 15 Maintenance And Service Manual

5. Remove the TouchPad (5).
Reverse this procedure to install the TouchPad.

Fan

Description
Fan (includes cable)
Before removing the fan, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the optical drive (see
5. Remove the bottom cover (see
6. Remove the battery (see
Remove the fan:
1. Disconnect the fan cable (1) from the system board.
2. Remove the three Phillips PM2.0×5.7 screws (2) that secure the fan to the keyboard/top cover.
Optical drive on page
Bottom cover on page
Battery on page 39).
36).
37).
Component replacement procedures
Spare part number
926845-001
49