Optical Drive - HP 15-ay000 Maintenance And Service Manual

Optical drive

NOTE: Optical drive spare part kits include bracket and bezel.
Description
DVD+/-RW Double-Layer SuperMulti Drive for use in all models
DVD+/-RW Double-Layer SuperMulti Drive for use in HP 250/256 G5 Notebook PC models
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
To remove the optical drive:
1. Remove the Phillips PM2.5×8.0 screw (1) that secures the optical drive to the computer.
2. Remove the optical drive (2) by sliding it out of the optical drive bay.
Battery on page 48).
Spare part number
858505-001
908491-001
Component replacement procedures 49