Accessories - General Instructions - KitchenAid K45SS Use And Care Manual

General Information
KitchenAid Accessories are designed to assure long life. The accessory power shaft and
®
hub socket are of a square design, to eliminate any possibility of slipping during the
transmission of power to the accessory. The hub and shaft housing are tapered to assure
a snug fit, even after prolonged use and wear. KitchenAid
power unit to operate them; the power unit is built-in.
See the Stand Mixer Attachments Use and Care Guide for speed settings and operating
times.
Accessory
Hub Socket
‡ Not part of
Stand Mixer.
To Attach
1. Turn speed control to "O."
2. Unplug Stand Mixer or disconnect
power.
3. Loosen accessory knob by turning it
counterclockwise. Remove accessory
hub cover.
4. Insert accessory shaft housing into
accessory hub, making certain that
accessory power shaft fits into square
accessory hub socket. It may be
necessary to rotate accessory back and
forth. When accessory is in proper
position, the pin on the accessory will
fit into the notch on the hub rim.
5. Tighten accessory knob by turning
clockwise until accessory is completely
secured to Stand Mixer.
Accessories
Accessory
Knob
General Instructions
18
Accessories require no extra
®
Accessory
Power Shaft‡
Notch
Pin
Accessory Shaft
Housing
6. Plug into proper electrical outlet.
Accessory
Housing