Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
REV 14g
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2014 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly, operating,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Advertisement
Summary of Contents for Chicago Electric 62383
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Table Of Contents
2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Page 2 For technical questions, please call 1-888-866-5797. Item 62383... -
Page 3: Safety
A wrench or a key left attached to a rotating part of the power tool may result in personal injury. Item 62383 For technical questions, please call 1-888-866-5797. Page 3... - Page 4 • Any power cord must be properly 7. Avoid unintentional starting. grounded. Ground Fault Circuit Interrupter Prepare to begin work before turning on the tool. (GFCI) should also be implemented – it prevents sustained electrical shock. Page 4 For technical questions, please call 1-888-866-5797. Item 62383...
- Page 5 If any abnormal as tingling, numbness, and white or blue fingers), seek medical advice as soon as possible. vibration occurs, stop use immediately. SAVE THESE INSTRUCTIONS. Item 62383 For technical questions, please call 1-888-866-5797. Page 5...
- Page 6 Association, and the National Electrical Code. 2. Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See Outlets for 2-Prong Plug.) Outlets for 2-Prong Plug Page 6 For technical questions, please call 1-888-866-5797. Item 62383...
- Page 7 Do not cover ventilation ducts. Keep flammable objects away. n 0 xxxx/min. No Load Revolutions per Minute (RPM) WARNING marking concerning Risk of Electric Shock. Properly connect power cord to appropriate outlet. Item 62383 For technical questions, please call 1-888-866-5797. Page 7...
-
Page 8: Specifications
Note: For additional information regarding the parts listed in the following pages, refer to Parts List and Diagram on page 14. Functions Depth Gauge Mode Switch Chuck Forward/ Reverse Lock Switch Button Trigger Auxiliary Handle Figure A Page 8 For technical questions, please call 1-888-866-5797. Item 62383... -
Page 9: Operation
3. Turn the Chuck Key clockwise to tighten the Chuck counterclockwise to open the mouth of the Chuck. on the bit. When not in use, the Chuck can be stored in the holder on the Key Sleeve (51). Item 62383 For technical questions, please call 1-888-866-5797. Page 9... - Page 10 Clean, then not precise values, only general guides). store the tool indoors out of children’s reach. 7. NOTE: Depth Gauge length may not be adequate for all drill bits used. Page 10 For technical questions, please call 1-888-866-5797. Item 62383...
- Page 11 5/32", 3/16", 1/4", 5/16" and 3/8" 46754 5-Piece 12" SDS Masonry Bit Set Concrete/Masonry 5/16", 3/8", 1/2", 3/4", and 1" 46755 5-Piece 16" SDS Masonry Bit Set Concrete/Masonry 5/16", 3/8", 1/2", 3/4", 1" Item 62383 For technical questions, please call 1-888-866-5797. Page 11...
-
Page 12: Maintenance
WARNING! If the supply cord of this • any other condition that may power tool is damaged, it must be replaced affect its safe operation. only by a qualified service technician. Page 12 For technical questions, please call 1-888-866-5797. Item 62383... - Page 13 See Extension Cords in Grounding section on page 6. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Item 62383 For technical questions, please call 1-888-866-5797. Page 13...
-
Page 14: Parts List And Diagram
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 14 For technical questions, please call 1-888-866-5797. Item 62383... - Page 15 Assembly Diagram Item 62383 For technical questions, please call 1-888-866-5797. Page 15...
-
Page 16: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.