Communication Connectors - SolarEdge Energy Bank Installation Manual

50 Communication Connectors
Wi-Fi
This communication option enables using a Wi-Fi connection for connecting to the
monitoring platform.
The Wi-Fi access point is built into the inverter. An antenna is required and available
from SolarEdge for connection to the monitoring platform.
Wireless Gateway, Wireless Repeater(s)
The Wireless Gateway collects inverter data using a dedicated Wi-Fi
connection and connects to the monitoring platform with the help of a
home router. Wireless Repeater(s) extend the Wi-Fi signal range between
the Wireless Gateway and inverter. Wireless Gateway and
Wireless Repeaters can be purchased separately from SolarEdge. For
more information, refer to
gateway-wireless-repeater-installation-guide.pdf.
Cellular
This wireless communication option enables using a cellular connection to connect one
or several devices (depending on the data plan used) to the monitoring platform.
The Cellular Plug-in is provided with a user manual, which should be
reviewed prior to connection. Refer to
https://www.solaredge.com/sites/default/files/se-cellular-plug-in-for-
inverters-with-setapp-installation-guide.pdf

Communication Connectors

Opening for cable size (diameter)
4.5 - 7 mm, with cut
2 - 4 mm, with cut
The communication board has the following connectors:
Standard RJ45 terminal block for Ethernet connection
USB
RS485 connector
The SolarEdge Wi-Fi antenna or Cellular Plug-ins can be connected to the
communication board for optional wireless connection.
https://www.solaredge.com/sites/default/files/se-wireless-
2.5 - 5 mm
Connection type
Ethernet (CAT6)
Antenna cable for wireless
communication
Single Phase Energy Hub Inverter MAN-01-00812-1.1
RS485