Chapter 3: Installing the Inverter
Install the inverter either before or after the modules and power optimisers have been
installed.
CAUTION!
Do not rest the connectors at the bottom of the inverter on the ground, as it
may damage them. To rest the inverter on the ground, lay it on its back.
Inverter Package Contents
One Energy Hub inverter
One mounting bracket
Two Allen screws for fastening the inverter to the mounting bracket
One 9V battery
Identifying the Inverter
Refer to the sticker on the inverter that specifies its Serial Number and its Electrical
Ratings. Provide the serial number when contacting SolarEdge support. The serial
number is also required when opening a new site in the SolarEdge monitoring platform.
Inverter Interfaces
The following figure shows the inverter connectors and components, located at the
bottom of the inverter.
Single Phase Energy Hub Inverter MAN-01-00812-1.1
Figure 4: Inverter Interfaces
Chapter 3: Installing the Inverter
21