Buttons; Assigning Quick Macros To Buttons - 3DConnexion CadMouse Pro Manual

Buttons

The Buttons panel within 3Dconnexion Settings allows you to assign commands, macros or radial menus to the programmable
CadMouse Buttons. The name of the active application is displayed at the top of the panel. Any changes you make to CadMouse
Pro settings are relevant to this application only.
While you are working in an application, the On-Screen Display always shows you the current assignment of the buttons for
this app. To hide the OSD, uncheck Always show On-Screen Display.
You have the option to swap the right mouse button and the middle mouse button by checking Swap Middle / Right Mouse
Buttons.
A note about Environment sensitivity: Some applications feature environment sensitive key mapping. In those applications you
can have different key assignments depending on the current active environment.

Assigning Quick Macros to buttons

Click on the text in the key field and press the required key or key combination to quickly assign a keystroke or macro to a
CadMouse button.
When a macro is created, it always sends a press and release command. If you want to assign a press and hold command
instead (for example Ctrl or Shift), you should use the Keyboard command category in the flyout window.
3Dconnexion CadMouse Pro | 8