Table of Contents
Advertisement
BASICS
Viewing Frequency Domain Results
Using the measurements calculated from the calibrated TDR/TDT waveforms, the WavePulser application generates Result traces (Sn), which plot a
single S-parameter measurement. Result traces can be analyzed with standard tools such as Cursors, Measure and Math, or used as inputs to SI Studio.
Go to WavePulser Setup > Result Display. Next to each trace you wish to display, check On, then select the S-parameter and Result to view.
Frequency results Magnitude in Decibels, Magnitude as Amplitude/Attentuation, Real Component, Imaginary Component, Phase in Degrees, Phase in Radians
18
933197-00 Rev A
Advertisement
Table of Contents
