Caution And Warning - Health O Meter 2650KL User Instructions

CAUTION AND WARNING


To prevent injury and damage to your scale, please follow these instructions very
carefully.

Assemble and operate the scale per the enclosed user instructions.

Operate these scales exclusively with the AC adapter provided by Health
o meter. Use of an unspecified adapter will void the warranty, and can
pose a serious safety hazard.

Prior to using these scales, inspect the AC adapter cord for
cracking/fraying, or for broken/bent plug prongs.

Prior to using these scales, ensure that the AC adapter is plugged into an
outlet with the rated voltage appropriate for operation.

Ensure that the AC adapter outlet is wired to a circuit breaker or other
protected power source.

Unplug the AC adapter, and carefully store both the adapter and adapter
cord before moving the scale.

Ensure that the AC adapter and scale do not come in contact with liquids,
excessive temperature, or excessive humidity.

Operating these scales at voltages and frequencies other than specified
can damage the equipment and will void the warranty.

Do not transport the scale with any weight on the platform.

Do not exceed recommended weight limit of 1000 lb / 454 kg for these
scales.

For accurate weighing, these scales must be placed on a flat, stable
surface. Also verify before each use the proper operation according to
the procedure described in this manual.

Do not use in the presence of flammable or explosive materials.

For accurate weighing, if the "Lo bAtt" indicator activates, replace the
batteries or switch to the AC adapter as soon as possible.

When operating the scale with the display assembly on a flat surface,
ensure that the load cell cable is routed to prevent a tripping hazard to the
patient or user.

When operating the scale with the display assembly on the wall, ensure
that the display is securely mounted with the appropriate anchors and
screws.

To prevent scale damage, ensure that the wall-mounted display is
removed off the wall prior to scale transport.

When wall mounting the display assembly, ensure that the mounting
location is free of electrical lines, gas pipes, and other safety hazards.

When replacing / inserting batteries, be sure to use all new batteries.
3