Use Wps With The Pin Method - NETGEAR Nighthawk EAX80-100 User Manual

Use WPS with the PIN method

To use the PIN method to connect a WiFi device to the extender's WiFi network, you
must know the PIN of the WiFi device that you are trying to connect.
To add a computer or WiFi device to the extender's WiFi network:
1. Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
• If you did not enable the One WiFi Name feature, enter http://mywifiext.local/
in the address field of the browser.
• If you enabled the One WiFi Name feature, enter one of the following URLs:
- Windows-based computers. http://mywifiext/ or http://mywifiext.local/
- Mac computers, iOS devices, and Linux devices. http://mywifiext.local/
-
Android devices. http://<extender's IP address>/ (for example,
http://192.168.1.3/)
For more information about how to find your extender's IP address, see Find
the Extender's IP address on page 69.
A login page displays.
3. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
4.
If your browser displays the Menu icon
The extender menu displays.
5. Select Settings > Do More > Connect Devices (WPS).
The Connect Devices (WPS) page displays.
6. Select the PIN Number radio button.
The page adjusts.
7. Type the PIN of the WiFi device in the field.
8. Click the NEXT button.
For four minutes, the extender attempts to find the computer or WiFi device.
9. Within four minutes, go to the WiFi device and use its WPS software to join the WiFi
network.
10. To verify that the WiFi device is connected to the extender's WiFi network, select
Settings > Connected Devices.
Extender Network Settings
Nighthawk AX8 8-Stream WiFi 6 Mesh Extender
, click it.
32 User Manual