Use Wps To Add A Computer To The Extender's Wifi Network; Use Wps With The Push Button Method - NETGEAR Nighthawk EAX80-100 User Manual

A login page displays.
3. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
4.
If your browser displays the Menu icon
The extender menu displays.
5. Select Settings > Wireless.
The WiFi Settings page displays.
6. From the 2.4 GHz Network or 5 GHz Network WiFi Speed menu, select a speed.
7. Click the SAVE button.
Your settings are saved.
Use WPS to add a computer to the
extender's WiFi network
WPS (WiFi Protected Setup) lets you connect a computer or WiFi device to the extender's
network without entering the WiFi network passphrase or key. Instead, you use a WPS
button or enter a PIN to connect.
If you use the push button method, the WiFi device that you are trying to connect must
include a physical button or a software button. If you use the PIN method, you must
know the PIN of the WiFi device that you are trying to connect.
WPS supports WPA and WPA2 WiFi security. If your extender network is open (no WiFi
security is set), connecting with WPS automatically sets WPA + WPA2 WiFi security on
the extender network and generates a random passphrase. You can view this passphrase
on the WiFi Settings page (for more information, see View WiFi settings on page 25).

Use WPS with the push button method

For you to use the push button method to connect a WiFi device to the extender's WiFi
network, the WiFi device that you are trying to connect must include a physical WPS
button or an onscreen WPS button that you can click.
Extender Network Settings
Nighthawk AX8 8-Stream WiFi 6 Mesh Extender
, click it.
30 User Manual