Top Panel Leds And Buttons - NETGEAR AX4200 User Manual

Top panel LEDs and buttons

The status LEDs and two buttons are located on the top panel of the router.
Figure 2. Top view
Table 1. LED descriptions
LED and Button
Power LED
Internet LED
Hardware Setup
Nighthawk AX5 5-Stream AX4200 WiFi Router
Description
• Solid white. The router is ready.
• Blinking white. The router is not ready, firmware is upgrading, or the Reset
button was pressed.
• Off. Power is not supplied to the router.
• Solid white. The Internet connection is ready.
• Blinking white. The port is sending or receiving traffic.
• Off. No Ethernet cable is connected between the router and the modem.
10 User Manual