Table of Contents
Advertisement
ZD200 Differential Probe
Reference Material
Certifications
Teledyne LeCroy certifies compliance to the following standards as of the
date of publication. For the current certifications, see the EC Declaration of
Conformity shipped with your product.
EMC Compliance
EC D
ECLARATION OF
The probe meets intent of EC Directive 2014/30/EU for Electromagnetic
Compatibility. Compliance was demonstrated to the following specifications
as listed in the Official Journal of the European Communities:
IEC/EN 61326-1:2013 EMC requirements for electrical equipment for
measurement, control, and laboratory use
Electromagnetic Emissions:
IEC/EN 55011/A1:2010 Radiated and Conducted Emissions Group 1 Class A
Electromagnetic Immunity:
IEC/EN 61000-4-2:2009 Electrostatic Discharge, 4 kV contact, 8 kV air, 4 kV
vertical/horizontal coupling planes
IEC/EN 61000-4-3/A2:2010 RF Radiated Electromagnetic Field, 3 V/m, 80-
1000 MHz; 3 V/m, 1400 MHz - 2 GHz; 1 V/m, 2 GHz - 2.7 GHz
1 To ensure compliance with applicable EMC standards, use high-quality shielded interface
cables.
2 This product is intended for use in nonresidential areas only. Use in residential areas may
cause electromagnetic interference.
3 Emissions which exceed the levels required by this standard may occur when the probe is
connected to a test object.
4 Meets Performance Criteria "B" limits of the standard: during disturbance, product undergoes
a temporary degradation or loss of function or performance which is self-recoverable.
European Contact:
Teledyne GmbH, European Division
Im Breitspiel 11c
D-69126 Heidelberg
Germany
Tel: (49) 6221 82700
12
C
- EMC
ONFORMITY
1
4
2 3
Advertisement
Table of Contents
