Front Panel And Side Panel Leds And Buttons - NETGEAR EX6400 User Manual

Front Panel and Side Panel LEDs and Buttons

The LEDs are located on the front panel. A switch and buttons are located on the side panel
and an Ethernet port is located on the bottom panel.
Router Arrow LED
Router Link LED
Factory Reset button
Power On/Off button
WPS button
Access Point/
Extender switch
Figure 1. Extender front panel and side panel
Table 1. LEDs
LED Description
Router Link LED This LED indicates the connection between the extender and the router
or access point.
•
•
•
•
Client Link LED This LED indicates the connection between the extender and a
WiFi-enabled computer or mobile device.
•
•
•
•
Power LED •
•
•
WPS LED •
•
•
AC1900 WiFi Range Extender
Solid green. Best connection.
Solid amber. Good connection.
Solid red. Poor connection.
Off. No connection.
Solid green. Best connection.
Solid amber. Good connection.
Solid red. Poor connection.
Off. No connection.
Solid amber. The extender is booting.
Solid green. The extender is powered on.
Off. The extender is powered off.
Solid green. WiFi security is enabled (WPA or WPA2).
Blinking green. The extender is making a WPS connection.
Off. WiFi security is not enabled.
Get to Know Your Extender
Client Arrow LED
Client Link LED
Power LED
WPS LED
Ethernet port (on the bottom)
6