Table of Contents
Advertisement
Comment
Add
Clear
Delete Selected
Delete All
Reset
Select
Click the 'Apply' button. You'll see the following message:
If you still need to configure this Wireless Mesh Point, click the 'CONTINUE' button;
if you want to save the changes and use it now, click the 'APPLY' button. You'll be
prompted to wait for 50 seconds before you can reconnect to this access point.
TIPS: If you don't know the MAC address of your computer or wireless device, you
can the procedure below:
For wireless devices and computers which are connected to this Wireless Mesh Point
already, you can click the 'Show Active Clients' button on the 'Home' setting page.
If you don't know how to get the MAC address of a
network client, see the following page.
Input any descriptive text about this rule, so you can
remember the purpose of this rule. You can input up to
20 alphanumerical characters in this field.
Add this MAC address to the list.
Clear 'MAC Address' and 'Comment' field.
Delete MAC address(es) you selected.
Delete all MAC addresses on the list. You'll be prompted
to confirm deletion first.
Uncheck all checked boxes.
All existing MAC addresses will be listed here. To delete a
MAC address from the list, check the box of the MAC
address you wish to delete first. You can select more
than one MAC address here.
76
Advertisement
Table of Contents
