Mac Address Filtering - Comtrend Corporation WAP-5922 User Manual

Item
Device SSID
Encryption
WPA Unicast Cipher
Suite
Pre-shared Key Format
Key
Channel

4.2.7 MAC Address Filtering

Besides using wireless security to only allow permitted wireless users to use this
wireless access point, you can also use the MAC address filter to allow wireless users
with certain MAC addresses to use this access point.
This will enhance security because you can make a 'white list' to allow users on the
list to use this Wireless Mesh Point. Clients who aren't listed on this white list, they
can't get connected, even if they know the password.
This is the current SSID name of the Wireless Mesh
Point. The SSID is used to identify your own Wireless
Mesh Point from others when there are other wireless
devices in the same area. You can type any
alphanumerical characters to change the SSID here,
maximum 32 characters.
This is the current security setup of the Wireless Mesh
Point. You can select an encryption method from the
drop-down menu, there are three options.
This is the current security setup of the Wireless Mesh
Point. Please select a type of WPA cipher suite.
Available options are: WPA (TKIP) and WPA2 (AES). You
can select one of them, but you have to make sure your
wireless client supports the cipher you selected.
This is the current security setup of the Wireless Mesh
Point. You can select the type of pre-shared key, you can
select the Passphrase (8 or more alphanumerical
characters, up to 63), or Hex (64 characters of 0-9, and
a-f).
This is the current security setup of the Wireless Mesh
Point. You can change the WPA passphrase here. It's not
recommended to use a word that can be found in a
dictionary due to security reasons.
This is the current channel of the Wireless Mesh Point.
74
Description