Comtrend Corporation WAP-5922 User Manual page 67

The description of every setup item is listed as follows:
Item
WPS Status
Self PinCode
SSID
Authentication Mode
Passphrase Key
WPS Setting
Start PBC
Start PIN
NOTE: For WPS2.0 compliance specification, WEP and WPA-PSK can't
support WPS connection, some of wireless devices may follow this latest
WPS2.0 specification, so we recommend not using WEP and WPA-PSK to
avoid WPS interoperability problems.
Shows the security setting status of WPS. If the wireless
security (encryption) function of this device is properly
set, you'll see the 'Configured' message here. If the
wireless security function has not been set, you'll see
'unConfigured'.
This displays an 8-digit number for WPS PIN-style
configuration. When another WPS-compatible device
wishes to connect to this Wireless Mesh Point and supports
Self-PIN type WPS, input this number to the wireless
device to establish connection.
Shows the SSID of this Wireless Mesh Point.
Shows the authentication mode of this Wireless Mesh
Point.
This shows asterisks (*) to indicate wireless security is
properly set.
You can select which band(2.4G or 5G) you want to build
wireless connection via the 'Start PBC' button. Default is
'2.4G'.
Click the 'Start PBC' button to start the Push-Button style
WPS setup procedure. This Wireless Mesh Point will wait
for WPS requests from another wireless device for 2
minutes.
The 'WPS' LED on the Wireless Mesh Point will be blinking
for 2 minutes when this Wireless Mesh Point is waiting for
an incoming WPS request.
Please input the PIN code of the wireless client you wish to
connect, and click the 'Start PIN' button.
The 'WPS' LED on the Wireless Mesh Point will be blinking
when this Wireless Mesh Point is waiting for an incoming
WPS request.
66
Description