6.
Please recheck the settings you made, and click 'Apply' to continue.
7.
Please wait for few seconds for device to reboot.
8.
After reboot is complete, you can close the browser to finish this quick setup
and connect this access point to an ADSL modem, wired router, or switch/hub
in your network through the LAN port of the access point by Ethernet cable.
NOTE: After quick installation is successful and you want to login to the
web user interface of the Wireless Mesh Point, please refer to '4.2 AP mode
Advanced Settings' for more functions or learn how to login to the web
user interface again.
61