Table of Contents
Advertisement
settings.
4.1.2 Web browser quick setup
Before you can connect to the Wireless Mesh Point and start configuration
procedures, your computer must be able to get an IP address automatically (use
dynamic IP address). If it's set to use static IP address, or you're unsure, please
refer to 'Chapter 6: 6.1 Configuring TCP/IP on PC' to set your computer to use a
dynamic IP address.
1.
Use an Ethernet cable to connect your computer's Ethernet port and Wireless
Mesh Point's Ethernet port.
Or use your computer's wireless configuration utility to search for an access
point named 'repeater0003' and get connected. (The default SSID of this
Wireless Mesh Point device is 'repeater0003', 0003 is a reference, it is the last
4 digits of the device's MAC number. Each device has a different MAC number,
please find it on your device label.)
57
Advertisement
Table of Contents
