Comtrend Corporation WAP-5922 User Manual page 46

The description of every setup item is listed as follows:
Item
Enable Wireless Access
Control
MAC Address
Comment
Add
Clear
Delete Selected
Delete All
Reset
Select
When you complete the settings in this page, click the 'Apply' button. You'll see
the following message:
If you still need to configure this Wireless Mesh Point, click the 'CONTINUE' button;
if you want to save the changes and use it now, click the 'APPLY' button. You'll be
prompted to wait for 50 seconds before you can reconnect to this Wireless Mesh
Point.
Check this box to enable MAC filtering. If you don't check
this box, anyone who knows the wireless password can
get connected to this Wireless Mesh Point.
Input the MAC address of the clients you wish to deny or
provide access to the Wireless Mesh Point into the MAC
address list. Input 12 HEX characters here, you don't
have to add : (colon) or - (dash) characters every 2
characters.
If you don't know how to get the MAC address of a
network client, see the following page.
Input any descriptive text about this rule, so you can
remember the purpose of this rule. You can input up to
20 alphanumerical characters in this field.
Add this MAC address to the list.
Clear 'MAC Address' and 'Comment' field.
Delete MAC address(es) you selected.
Delete all MAC addresses on the list. You'll be prompted
to confirm the deletion first.
Uncheck all checked boxes.
All existing MAC addresses will be listed here. To delete a
MAC address from the list, check the box of the MAC
address you wish to delete first. You can select more
than one MAC address here.
45
Description