Comtrend Corporation WAP-5922 User Manual page 39

The description of every setup item is listed as follows:
Item
Fragment Threshold
RTS Threshold
Beacon Interval
DTIM Period
Preamble Type
Broadcast ESSID
CTS Protect
The threshold (number of bytes) of the fragmentation
boundary for directed messages.
It is the maximum data fragment size that can be sent.
Input a value between 256 and 2346. Do not modify the
default value if you don't know what it is. The default
value is 2346.
The RTS (Request To Send) threshold parameter controls
what size data packet (number of bytes) the low level RF
protocol issues to an RTS packet. The default is 2347. Do
not modify the default value if you don't know what it is.
The default value is 2347.
The Beacon Interval value indicates the frequency
interval of the beacon. Enter a value between 20 and
1000.
A beacon is a packet broadcast by the Router to
synchronize the wireless network. The default value is
100. Do not modify the default value if you don't know
what it is. The default value is 100.
Configures DTIM (Delivery Traffic Indication Message)
send period. The default value is 3.
The Preamble type defines the length of the CRC (Cyclic
Redundancy Check) block for communication between
the Access Point and roaming wireless adapters.
Do not modify the default value if you don't know what it
is. The default setting is 'Short Preamble'.
When set to 'enabled', every wireless device can scan
and find this Wireless-N Range Mesh Point; when set to
'disabled', only wireless clients who know the exact SSID
can get connected with this Wireless-N Range Mesh
Point. Setting to disabled will help to improve security.
This function provides CTS (Clear to Send) protection
when transferring data. Selecting 'Auto' for this option is
recommended.
38
Description