Comtrend Corporation WAP-5922 User Manual page 37

Item
WPS Status
Self PinCode
SSID
Authentication Mode
Passphrase Key
WPS Setting
Start PBC
Start PIN
NOTE: For WPS2.0 compliance specification, WEP and WPA-PSK can't
support WPS connection; some of your wireless devices may follow this
latest WPS2.0 specification, so we recommend not using WEP and
WPA-PSK to avoid WPS interoperability problems.
If the wireless security (encryption) function of this device
is properly set, the WPS status will display 'Configured'. If
the wireless security function has not been set, the WPS
status will display 'unConfigured'.
This displays an 8-digit number for WPS PIN-style
configuration. When another WPS-compatible device
wishes to connect to this Wireless Mesh Point and supports
Self-PIN type WPS, input this number to the wireless
device to establish connection.
SSID stands for Service Set Identifier. All stations must be
configured with the correct SSID to access the Wireless
Network.
Shows the authentication mode of this Wireless Mesh
Point.
This shows asterisks (*) to indicate that the wireless
security is properly set.
You can select which band (2.4G or 5G) you want to build
the wireless connection via 'Start PBC' button. Default is
'2.4G'.
Click the 'Start PBC' button to start the Push-Button style
WPS setup procedure. This Wireless Mesh Point will wait
for WPS requests from another wireless device for 2
minutes.
The 'WPS' LED on the Wireless Mesh Point will be blinking
for 2 minutes when this Wireless Mesh Point is waiting for
an incoming WPS request.
Input the PIN code of the wireless client you wish to
connect to, and the click 'Start PIN' button.
The 'WPS' LED on the wireless Mesh Point will be blinking
when this wireless Mesh Point is waiting for an incoming
WPS request.
36
Description