Table of Contents
Advertisement
3.2 Repeater mode Advanced Settings
3.2.1 Connect to web configuration menu
Open your web browser (IE, Firefox, Chrome etc.) and find the 'Wireless
Repeaterxxxx Web UI' firmware link on your bookmark list if you saved it when you
installed this device for the first time.
10. Input http://192.168.2.252 in the address bar, then press the ENTER key:
NOTE: The default IP address of repeater mode is 192.168.2.252
The Wireless Mesh Point will prompt you to input the username and password. The
default username is 'admin' and password is '1234'. Click the 'OK' button to
continue.
31
Advertisement
Table of Contents
