Chapter 3 Repeater Mode; Repeater Mode Quick Installation Guide - Comtrend Corporation WAP-5922 User Manual

Chapter 3 Repeater Mode

This chapter will explain how to quickly install this device by using the quick setup
method and explain each detailed setting on the web user interface while in repeater
mode.

3.1 Repeater Mode Quick Installation Guide

For first time setup and installation, move this Wireless Mesh Point close to the
Wireless Broadband Router or Access point you wish to connect to. After installation
is complete, move this Wireless Mesh Point to the place you wish to permanently
wish to use it.
Plug this Wireless Mesh Point into a power outlet on the wall, and you should see the
'Power' LED light up in few seconds. If not, check if the power outlet you're using is
working.
You can setup the wireless connection via the 'Hardware WPS button' or 'Software
web browser'.
If your broadband router or access point also supports a 'WPS button', we
recommend you to use the WPS button to establish connection.
21