8. If you are using a Comtrend WiFi Mesh-Supported Gateway, then
the WiFi Mesh System will automatically use the original WiFi
settings on your Gateway. If you are using a Non-Comtrend
WiFi-Supported Gateway, then please reference the back of the
Mesh Point that is connected to the Gateway for the default SSID
and Password WiFi settings.
If you would like to change your network's SSID or Password please
continue to section 2.1.1.
2.1.1 WiFi Network Setup
1. You can now use your computer's Wireless configuration
utility to search for a Wireless Network name such as: repeater0003.
(The default SSID of this Mesh point is 'repeater0003', and 0003 is
for reference. It will be the last 4 digits of the device's MAC number.)
2. Open your Web browser, and input 'http://comtrend.setup' in the address
bar.
19