Table of Contents
Advertisement
LED Activity
LEDs
Behavior
Signal
Strength
LED1 on
LED2 off
LED3 off
LED1 off
LED2 on
LED3 off
Description
1. The device is in repeater
mode, when LED2 & 3 are off
and LED1 is on. It means the
device has optimal signal
quality.
2. Device in AP mode, when
LED1 is solid on, it represents
the device is ready.
(Device ready means it
obtained an IP from the
uplink DHCP server.)
1. The device is in repeater
mode, when LED1 & 3 are off
and LED2 is on. It indicates the
current placement is too close
to the uplink router, which is
not an effective placement of
the wireless mesh point.
13
Note
An optimal signal
means the Wireless
Mesh Point is placed
with proper
distance to help to
extend the
network.
Good signal:
-45 to -60dBm
Signal too strong:
> -45dBm
Advertisement
Table of Contents
