Immergas 3.030863 Instructions And Warnings page 41

Menu item
Return temperature 2
DHW Setpoint
DHW Temp.
Board firmware ver.
Display firmware ver.
Menu item
HP Disable
HP Disable Start
HP Disable End
Dehumification Disable
Dehum. Disable Start
Dehum. Disable End
CH min. set
Cooling min. Set
Information Menu
Temperature read by the return sensor of the backup generator
DHW Setpoint
Temperature read by DHW probe
System firmware revision
Zone Remote Panel firmware revision
It allows to disable the heat pump according to the set time slot
Allows to set when disabling starts
Allows to set when disabling ends
Disabling of request to the dehumidifier, according to the daily
time slot
Time of dehumidification request disabling phase start
Time of dehumidification request disabling phase end
Minimum flow temperature for heating
Minimum flow temperature for cooling
Description
User Menù
Description
Customised
Range
value
Yes / No
0 - 23 h
0 - 23 h
Yes / No
0 - 23 h
0 - 23 h
20 ÷ 85 °C
5 ÷ 25 °C
41