Summer Mode With Cooling Functions; Operation With External Probe - Immergas 3.030863 Instructions And Warnings

7. SUMMER MODE WITH COOLING
FUNCTIONS
With the Zone Remote Panel in Summer mode with Cooling
( ), the production of DHW, room central cooling and
room dehumidifier are enabled. Two main functioning
modes can be selected: automatic or temporary manual.
These operating modes are similar to those found in the
WINTER mode.
The room dehumidification function is activated
automatically according to the humidity setpoint set on
the Zone Remote Panel(see Zone Setpoint Menu) and the
relevant room humidity value measured by the device.
The room dehumidification function is a manual function,
i.e. it does not depend on the set time program.
36
8. OPERATION WITH EXTERNAL
PROBE.
When the external probe is enabled in the appliance, the
symbol is shown on the Zone Remote Panel display (
From this moment, the system's flow temperature for room
central heating is calculated depending on the external
temperature measured. It is possible to change the operation
curve by using the main switch and changing the external
probe offset (Ref. 1 Fig. 4).
).