Touchpad cable
To remove the touchpad cable, use this procedure and illustration.
NOTE:
The touchpad cable spare part kit includes touchpad cable.
Table 5-9
Touchpad cable description and part number
Description
Touchpad cable
Before removing the touchpad cable, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the touchpad cable:
1.
Release the ZIF connector (1) to which the touchpad cable is connected, and then disconnect the touchpad
cable from the system board.
2.
Release the ZIF connector (2) to which the touchpad cable is connected, and then disconnect the touchpad
cable from the touchpad.
3.
Remove the touchpad cable (3).
Reverse this procedure to install the touchpad cable.
Touchpad
To remove the touchpad, use this procedure and illustration.
48
Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
Battery on page
29).
27).
Spare part number
M59262-001
27).