Table of Contents
Advertisement
d.
Remove the display bracket (2).
e.
Remove the display hinge plug (1) from the right hinge.
f.
Release the webcam/microphone module cable from the retention clips (2) built into the display back
cover.
g.
Detach the webcam/microphone module cable (3) from the display back cover. (The webcam/
microphone module cable is attached to the display back cover with double-sided adhesive.)
h.
Lift up evenly across the webcam/microphone module and detach the module up from the display
back cover (4).
The webcam/microphone module is available using spare part number M59278-001.
i.
Release the ZIF connector (1) to which the webcam/microphone module cable is attached, and then
disconnect the webcam/microphone module cable (2) from the webcam/microphone module.
The webcam/microphone module cable is available using spare part number M59265-001.
Display assembly
45
Advertisement
Table of Contents
