Table of Contents
Advertisement
c.
Simultaneously twist (2) and pull (3) the tape away from the display panel.
d.
Release the G-sensor module (1) from the display back cover. (The G-sensor module is secured to the
display back cover with double-sided adhesive.)
e.
Release the display panel cable from the retention clips (2) and routing channel built in to the display
back cover.
f.
Remove the display hinge plug (3) from the left hinge.
g.
Lift the top edge (1) of the display panel until it rests at an angle.
42
Chapter 5 Removal and replacement procedures for authorized service provider parts
Advertisement
Table of Contents
