Table of Contents
Advertisement
Reverse this procedure to install the heat sink.
Power adapter cable
To remove the power adapter cable, use this procedure and illustration.
Table 5-8
Power adapter cable description and part number
Description
Power adapter cable
Before removing the power adapter cable, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the system board (see
4.
Remove the WLAN module (see
5.
Remove the system board (see
Remove the power adapter cable:
1.
Turn the system board upside down with the front toward you.
38
Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
27).
WLAN module on page
31).
System board on page
34).
27).
Battery on page
29).
Spare part number
M59263-001
Advertisement
Table of Contents
