Table of Contents
Advertisement
8.
Remove the system board (3) by sliding it up and to the left at an angle.
9.
Thoroughly clean the thermal pad material from the surfaces of the system board and the top cover/
keyboard components each time the system board is removed. Replacement thermal pad material is
included with the system board and top cover/keyboard spare part kits. The following illustration shows the
replacement thermal material locations.
A thermal pad is used on the system board (1) and on the top cover/keyboard (2).
Reverse this procedure to install the system board.
Heat sink
To remove the heat sink, use these procedures and illustrations.
36
Chapter 5 Removal and replacement procedures for authorized service provider parts
Advertisement
Table of Contents
