Table of Contents
Advertisement
Before removing the connector board, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the system board (see
Remove the connector board:
1.
Release the ZIF connectors (1) to which the connector board cables are connected, and then disconnect the
connector board cables from the system board.
2.
Disconnect the power adapter cable (2) from the connector board.
3.
Remove the four Phillips M2.0 × 3.6 screws (3) that secure the connector board to the computer.
4.
Remove the connector board (4) and cables.
Reverse this procedure to install the connector board.
System board
To remove the system board, use these procedures and illustrations.
Table 5-6
System board descriptions and part numbers
Description
System board (includes an integrated AMD 3015Ce processor, graphics subsystem with UMA memory, and replacement thermal material):
Equipped with 8 GB of system memory and 128 GB of eMMC storage
Equipped with 8 GB of system memory and 64 GB of eMMC storage
Equipped with 4 GB of system memory and 64 GB of eMMC storage
Equipped with 4 GB of system memory and 32 GB of eMMC storage
34
Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
27).
27).
Battery on page
29).
Spare part
number
M59277-001
M59276-001
M59275-001
M59274-001
Advertisement
Table of Contents
