Connector Board - HP Chromebook x360 14a-cb0 Series Maintenance And Service Manual

NOTE: The connector board high-speed cable is available using spare part number M59261-001. The
connector board low-speed cable is available using spare part number M59260-001.
Before removing the connector board cables, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the connector board cable:
1. Release the zero insertion force (ZIF) connectors (1) to which the connector board cables are connected, and
then disconnect the connector board cables from the system board.
2. Release the ZIF connectors (2) to which the connector board cables are connected, and then disconnect the
connector board cables from the connector board.
3. Remove the connector board cables (3).
Reverse this procedure to install the connector board cables.

Connector board

To remove the connector board, use this procedure and illustration.
Table 5-5 Connector board description and part number
Description
Connector board (includes USB Type-C power connector and SuperSpeed port and USB SuperSpeed port with
HP Sleep and Charge)
NOTE: The connector board spare part kit does not include the connector board cables. The connector board cable is available using spare
part number M45459-001.
Preparation for disassembly on page
Bottom cover on page 27).
27).
Battery on page 29).
Spare part number
M59268-001
Connector board 33