Table of Contents
Advertisement
Table 2-2
Left-side components and their descriptions (continued)
Component
(4)
(5)
Display
Use the illustration and table to identify the components on the display.
Memory card reader (select products only)
Power button
Description
Connects a USB device, provides high-speed data transfer,
and (for select products) charges small devices (such as a
smartphone) when the computer is on or in Sleep mode.
NOTE:
Use a standard USB Type-C charging cable or cable
adapter (purchased separately) when charging a small external
device.
– and –
Connects a display device that has a USB Type-C connector,
providing DisplayPort output.
Reads optional memory cards that store, manage, share, or
access information.
To insert a card:
1.
Hold the card label-side up, with the connectors facing
the computer.
2.
Insert the card into the memory card reader, and then
press in on the card until it is firmly seated.
To remove a card:
Press in on the card, and then remove it from the memory
▲
card reader.
When the computer is off, press the button briefly to turn
●
on the computer.
When the computer is in the Sleep state, press the button
●
briefly to exit Sleep (select products only).
When the computer is in Hibernation, press the button
●
briefly to exit Hibernation.
IMPORTANT:
Pressing and holding down the power button
results in the loss of unsaved information.
If the computer has stopped responding and shutdown
procedures are ineffective, press and hold the power button
for at least 10 seconds to turn off the computer.
Display
5
Advertisement
Table of Contents
