Placing The Grease Bucket; Mounting The Accessory Tray; Attaching The Bottle Opener; Attaching The Lid Handle - Louisiana Grills LG800E Assembly And Operation Manual

7. PLACING THE GREASE BUCKET

Parts Required:
1 x Grease Bucket (#9)
Installation:
• Place the grease bucket on the spout hook on the interior of the cart
cabinet. Ensure it is level to avoid grease spills.

8. MOUNTING THE ACCESSORY TRAY

Parts Required:
1 x Accessory Tray (#14)
Screw (#D)
4 x
Installation:
• Secure the top two corners of the accessory tray to the front of the
grill using one screw in each corner. To secure the bottom, insert a
screwdriver into the holes provided and secure the other two screws.
NOTE: Avoid storing items in the tray for long periods of time, as the
accessory tray will become warm when using the grill and may cause
some items to melt.

9. ATTACHING THE BOTTLE OPENER

Parts Required:
1 x Bottle Opener (#13)
Screw (#B)
2 x
Installation:
• Secure the bottle opener to the front of the grill using two screws on
the support brace.

10. ATTACHING THE LID HANDLE

Parts Required:
1 x Lid Handle (#10)
2 x Lid Handle Bezel (#11)
Installation:
• Remove the two pre-installed screws from the lid handle. From inside
the barrel lid, insert one screw so that it protrudes to the outside.
Add a bezel on the screw, then hand-tighten the screw (from the
inside) into the lid handle. Repeat same installation for other end of
lid handle.
NOTE: Do not over-tighten screws. Only a snug fit is necessary.
10
7
8
D
14
D
9
B
B 13
10
10
11
9
11