Troubleshoot Internet Browsing - NETGEAR Nighthawk AC2600 User Manual

Smart wifi router
Hide thumbs Also See for Nighthawk AC2600:
Table of Contents

Advertisement

Nighthawk AC2600 Smart WiFi Router Model AC2600
If your router is still unable to obtain an IP address from the ISP, the problem might be one of the following:
Your Internet service provider (ISP) might require a login program. Ask your ISP whether they require
PPP over Ethernet (PPPoE) or some other type of login.
If your ISP requires a login, the login name and password might be set incorrectly.
Your ISP might check for your computer's host name. Assign the computer host name of your ISP
account as the account name on the Internet Setup page.
If your ISP allows only one Ethernet MAC address to connect to Internet and checks for your computer's
MAC address, do one of the following:
-
Inform your ISP that you bought a new network device and ask them to use the router's MAC
address.
-
Configure your router to clone your computer's MAC address.
If your router obtained an IP address, but your computer does not load any web pages from the Internet,
it might be for one or more of the following reasons:
Your computer might not recognize any DNS server addresses.
A DNS server is a host on the Internet that translates Internet names (such as www addresses) to
numeric IP addresses. Typically, your ISP provides the addresses of one or two DNS servers for your
use. If you entered a DNS address during the router's configuration, reboot your computer, and verify
the DNS address. You can configure your computer manually with DNS addresses, as explained in
your operating system documentation.
The router might not be configured as the TCP/IP gateway on your computer.
If your computer obtains its information from the router by DHCP, reboot the computer and verify
the gateway address.
You might be running login software that is no longer needed.
If your ISP provided a program to log you in to the Internet (such as WinPoET), you no longer need
to run that software after installing your router. You might need to go to Internet Explorer and select
Tools > Internet Options, click the Connections tab, and select Never dial a connection. Other
browsers provide similar options.

Troubleshoot Internet Browsing

If your router can obtain an IP address but your computer is unable to load any web
pages from the Internet, it might be for the following reasons:
• The traffic meter is enabled, and the limit was reached.
By configuring the traffic meter not to block Internet access when the traffic limit is
reached, you can resume Internet access. If your ISP sets a usage limit, they might
charge you for the overage.
• Your computer might not recognize any DNS server addresses. A DNS server is a
host on the Internet that translates Internet names (such as www addresses) to numeric
IP addresses.
Troubleshooting
154
User Manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents