Advertisement
Quick Links
Quick Install Guide
VD-21IR | Compact Vandal Dome IP Camera
A
Package Contents
1. Network Camera
2. Tools package (Screw Kit)
3. CD (Software, Manual...etc.)
4. Quick Installation Guide
B
Installation
Please follow the below instructions to setup your network camera.
1.
Remove the front cover by using the screw driver as the below arrow shows.
2.
Fix the camera on the wall or ceiling with supplied screws, and twist viewing angle as you wish.
3.
Adjust the tilt angle and focus as you desire.
＊ It comes from the tools package.
Page 1
Advertisement
Related Manuals for Comtrend Corporation VD-21IR
Summary of Contents for Comtrend Corporation VD-21IR
- Page 1 Quick Install Guide VD-21IR | Compact Vandal Dome IP Camera Package Contents 1. Network Camera 2. Tools package (Screw Kit) 3. CD (Software, Manual…etc.) 4. Quick Installation Guide Installation Please follow the below instructions to setup your network camera. Remove the front cover by using the screw driver as the below arrow shows.
- Page 2 Connect this network camera to a *PoE switch, PoE injector, or DC 5V adapter. Make sure all connection is stable. ＊. The network camera supports both PoE power or DC 5V adapter. Connect the network cable to network camera. DC 12V Re-mount the cover and tighten.
- Page 3 Accessing Your New Camera You can access your network camera by its web interface via web browser. Use the utility named ‘IPFinder.exe’ from the CD to find the IP address of the camera. ＊ The new network camera's default IP address setting is DHCP mode. ＊...
- Page 4 ＊Recommend using IE 9.x or later browsers. 5. If your PC shows the message ‘Windows Firewall has blocked some features of this program’, please click ‘Allow access’, or the camera may not be function properly. 6. When you’re installing the IE plugin, you may also be prompted that if you want to allow changes to be made to your computer.