Page 1
PAGE: 1/4 Model: Date: No.: Ko-P1 13-Mar-19 RM0BY001 Subject: Prepared by: FSM correction on manual adjustment of print head position H. Morishima From: 1st System Biz Promotion Sec., IP Business Center Troubleshooting Part information Action required Classification: Mechanical...
Page 2
PAGE: 2/4 Model: Date: No.: Ko-P1 13-Mar-19 RM0BY001 Value of SP3-175 (μm) Rotation angle (degree) Cam Rotation direction (Read value of colorimetric sensor) -144 -140 78.2 -130 65.4 -120 57.1 -110 50.3 -100 44.4 34.1 Counter clockwise 29.4 24.0...
Page 3
PAGE: 3/4 Model: Date: No.: Ko-P1 13-Mar-19 RM0BY001 Adjusting Head Position in the Direction of Sub Scan (P.244~) 5. Adjust the head position until the value displayed on the operation panel turns ± 10 m. Rotate the sub scan direction head position adjustment cam [A] to adjust the head position.
Page 4
PAGE: 4/4 Model: Date: No.: Ko-P1 13-Mar-19 RM0BY001 Value of SP3-175 (μm) Rotation angle (degree) Cam Rotation direction (Read value of colorimetric sensor) -200 -190 71.9 -180 64.2 -170 58.3 -160 53.2 -150 48.6 -140 44.5 In case of adjusting -130 40.6...
Page 5
2. Installed ONXY RIP is initial state. If new profiles or “QuickSet” have been created or imported, delete them. Delete printer “Ricoh Pro L51XX” from the ONYX RIP. How to delete the printer: 1. Select RIP-Queue > FILE > “Manage Printers…”...
Page 6
PAGE: 2/4 Model: Date: No.: Ko-P1 14-Mar-19 RM0BY002 2. Select the printer and click “Delete”. How to update 1. Download the latest version of ONYX RIP driver from the firmware download site. 2. Execute the driver file which downloaded in step1.
Page 7
PAGE: 3/4 Model: Date: No.: Ko-P1 14-Mar-19 RM0BY002 4. Select “Update Printer” and check “Update Driver” in “Configure Options” screen. Note: If delete the printer from ONYX RIP in advance, step4 is skipped. If “New Printer” is selected, both new and old printer driver exist together. In this case, both drivers have to be deleted once and the new driver have to be re- installed.
Page 8
PAGE: 4/4 Model: Date: No.: Ko-P1 14-Mar-19 RM0BY002 5. Driver update is executed. Note: Command prompt screen appears while executing. 6. Click “Finish” after completing driver update, then RIP-Queue appears. 7. Check the updated driver version from RIP-Queue.
Page 9
PAGE: 1/1 Model: Date: No.: Ko-P1 18-Mar-19 RM0BY003 Subject: Prepared by: Network setting of the RIP PC H. Morishima From: 1st System Biz Promotion Sec., IP Business Center Troubleshooting Part information Action required Classification: Mechanical Electrical Service manual revision...
Page 10
PAGE: 1/1 Model: Date: No.: Ko-P1 2-Apr-19 RM0BY004 Subject: Prepared by: FSM correction on NV-RAM replacement H. Morishima From: 1st System Biz Promotion Sec., IP Business Center Troubleshooting Part information Action required Classification: Mechanical Electrical Service manual revision...