3DConnexion SpaceMouse Pro Manual page 6

Connect your SpaceMouse Pro Wireless
Note: Since your SpaceMouse Pro Wireless is factory paired with the Universal Receiver, you must first remove the Universal
Receiver from your computer, before you can pair it with the Keyboard Pro.
Pairing via the 3Dconnexion Keyboard Pro:
Access the Windows start menu and launch the 3Dconnexion Pairing tool. Now press Add device and follow the instructions of
the 3Dconnexion Pairing tool to connect your SpaceMouse Pro Wireless with your Keyboard Pro.
Charge your SpaceMouse Pro Wireless
When the status LED of your SpaceMouse Pro Wireless turns red, it has less than 10% battery power left and should be
charged. Connect your SpaceMouse to a charging port of your computer by using the included USB cable. As long as the
SpaceMouse Pro Wireless is charging, the status LED will pulse green, and it will turn solid green when it is fully charged.
The SpaceMouse Pro Wireless can be connected via the included 3Dconnexion Universal
Receiver, the 3Dconnexion Keyboard Pro, or USB cable.
3Dconnexion SpaceMouse Pro Wireless | 6