Table of Contents
Advertisement
QuickStart Guide
Desktop Setup
Place the SpaceMouse Pro Wireless on the opposite side of the keyboard to your standard mouse. One hand engages the 3D
mouse to position your model: rotating, panning and zooming. The other hand uses the standard mouse to select, create and
edit.
Hand Position
Position your hand as shown. The contoured controller cap will guide your fingers into the perfect position for precise and
effortless control.
Installation
1. Connect USB Hub
Use the USB cable to connect the Twin-Port USB Hub with your PC.
2. Insert Universal Receiver
Insert the 3Dconnexion Universal Receiver into the Twin-Port USB Hub.
3. Turn on the SpaceMouse Pro Wireless
Turn on the power switch located on the back of your SpaceMouse Pro Wireless.
4. Download and install the latest 3Dconnexion software
Make sure you have the latest 3Dconnexion software (3DxWare) installed. The latest version can be downloaded at
3dconnexion.com/drivers.
5. Familiarize with your SpaceMouse Pro Wireless
Open 3Dconnexion Home and launch the Trainer to get help taking the first steps with your SpaceMouse Pro Wireless.
3Dconnexion SpaceMouse Pro Wireless | 3
Advertisement
Table of Contents
