Download Print this page

Dyson Cyclone v10 Operating Manual page 21

Hide thumbs Also See for Cyclone v10:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 19
Repairs or alterations carried out by parties other than Dyson or its
authorised agents.
Blockages – please refer to the Dyson Operating Manual for details
on how to look for and clear blockages.
Normal wear and tear (e.g. fuse, brush bar etc.).
Use of this appliance on rubble, ash, plaster.
Reduction in battery discharge time due to battery age or use
(where applicable).
If you are in any doubt as to what is covered by your guarantee,
please contact Dyson.
SUMMARY OF COVER
The guarantee becomes effective from the date of purchase (or the date
of delivery if this is later).
You must provide proof of (both the original and any subsequent)
purchase/delivery before any work can be carried out on your Dyson
appliance. Without this proof, any work carried out will be chargeable.
Keep your receipt or delivery note.
All work will be carried out by Dyson or its authorised agents.
Any parts which are replaced by Dyson will become the property
of Dyson.
The repair or replacement of your Dyson appliance under guarantee
will not extend the period of guarantee.
The guarantee provides benefits which are additional to and do not
affect your statutory rights as a consumer.
IMPORTANT DATA PROTECTION INFORMATION
When registering your Dyson appliance:
You will need to provide us with basic contact information to register
your appliance and enable us to support your guarantee.
When you register, you will have the opportunity to choose whether
you would like to receive communications from us. If you opt-in to
communications from Dyson, we will send you details of special offers
and news of our latest innovations. We never sell your information
to third parties and only use information that you share with us as
defined by our privacy policies which are available on our website
privacy.dyson.com.
CN
使用您的戴森产品
在使用前, 请阅读本戴森操作手册中的 "重要安全说明" 。
充电挂座安装
拆开充电挂座、 插头和说明书包装。
选择充电挂座的位置, 并确保在安装位置背后没有裸露的管道 (气体、 水
或空气管道) 、 电线或通风管道。
按照安装说明书上的说明操作。
将附件安装到位。
将设备放置在充电挂座上。
接入电源并开启以进行充电。
戴森建议如有必要, 应在安装充电挂座时使用防护服、 护目镜和其它防护
材料。
充电挂座必须依照规定和适用的法规/标准 (国家和当地法律可能适用)
进行安装。
使用吸尘器
将设备从充电挂座上拆下。
检查吸头或工具的下方是否洁净, 并且没有可能导致损害的异物。
在清洁地板或地毯前, 请先确认制造商建议的清洁指南。
本产品上的刷条可能会损坏某些地毯和地板。 在使用本产品进行清洁时,
旋转的刷条可能会使某些地毯起毛, 如果发生了这种情况, 我们建议在吸
尘时不要使用电动地板吸头, 并咨询您的地板地毯制造商。
充电指示灯
正在充电,电量低
正在充电,电量中等
正在充电,接近充满
已充满
06.09.2017 07:40 - C87672_SV12_OPMAN_FEAST_X248-V10-ABSOLUTE-OPMAN-87672.indd_15_4c0s
使用期间指示灯
电量高
电量中等
电量低
电已耗尽,需要充电
诊断灯
电池故障 - 请致电戴森帮助热线
主机体故障 - 请致电戴森帮助热线
充电器故障 - 请致电戴森帮助热线
滤网清洗和阻塞物指示灯LED
阻塞物指示灯
过滤器装置需要清洗
过滤器装置没有正确安装
请查看电池部分
清空透明集尘筒
一旦灰尘达到 "MAX (最大) " 标记, 请尽快清空 - 请勿超出最大容量。
清空透明集尘筒前, 确保本产品已从充电器断开。 小心不要按到 "开" 开
关。
在清空时, 请勿触发 "开启" 触发器。
通过按下红色棒释放按钮将吸尘杆拆下, 并从集尘筒中拉出。
清空灰尘:
– 握住设备, 集尘筒处于向下位置。
– 用力按下红色的集尘筒释放按钮。
– 集尘筒将滑下, 同时清洁网罩。
– 集尘筒底部随之打开。
– 如果红色按钮没有完全推下, 则集尘筒底部不会打开。
清空时为了尽量减少与灰尘接触, 请将透明集尘筒紧包在塑料袋中并清
空。
小心地从塑料袋中移开集尘筒。
将塑料袋封紧, 进行常规处理。
清洁透明集尘筒 (可选)
如果需要, 可清洁透明集尘筒:
按照 "清空透明集尘筒" 一节中的说明操作。
按下位于集尘筒导槽上的银色按钮, 将集尘筒释放, 并将集尘筒滑出导
槽。
只能使用湿布清洁透明集尘筒。
在进行更换之前, 确保透明集尘筒和密封件完全干燥。
重新安装透明集尘筒:
– 将支柱插入集尘筒导槽
向上推动集尘筒底部关闭透明集尘筒, 直至透明集尘筒和集尘筒底部卡
扣到位。
在清洁透明集尘筒时, 建议不要使用洗碗机, 也不要能使用清洁剂、 抛光
剂和空气清新剂, 这些可能会损害设备。
21

Advertisement

loading