System Board - HP 13-be0 Series Maintenance And Service Manual

2. Remove the USB door from the computer (2).
Reverse this procedure to install the USB door.

System board

To remove the system board, use these procedures and illustrations.
Table 5-12 System board descriptions and part numbers
Description
System board (includes processor):
All system boards use the following part numbers:
xxxxxx-001: Non-Windows operating system
xxxxxx-601: Windows 10 operating system
AMD Ryzen7 5800U processor and 16 GB of system memory
AMD Ryzen7 5800U processor and 8 GB of system memory
AMD Ryzen5 5600U processor and 16 GB of system memory
AMD Ryzen5 5600U processor and 8 GB of system memory
Before removing the system board, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the solid-state drive (see
5. Remove the fan (see
When you replace the system board, be sure to remove the following components (as applicable) from the
defective system board and install them on the replacement system board:
WLAN module (see
●
● Heat sink (see
Remove the system board:
1. Disconnect the following cables from the system board:
42 Chapter 5 Removal and replacement procedures for authorized service provider parts
Bottom cover on page
Battery on page
Solid-state drive on page
Fan on page 37).
WLAN module on page
Heat sink on page 38).
Preparation for disassembly on page
29).
31).
32).
34).
Spare part number
M52827-xx1
M52828-xx1
M52825-xx1
M52826-xx1
29).