Audio Board - HP 13-be0 Series Maintenance And Service Manual

2. Use tweezers to remove the light bar from the computer (2).
Reverse this procedure to install the light bar.

Audio board

To remove the audio board, use this procedure and illustration.
Table 5-10 Audio board description and part number
Description
Audio board
Audio board cable
Before removing the audio board, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the audio board:
1. Disconnect the cable from the ZIF connector on the audio board (1).
2. Remove the Phillips M2.0 × 3.0 screw (2) that secures the board to the computer.
40 Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page 29).
29).
Battery on page 31).
Spare part number
M52798-001
M52812-001