Heat Sink - HP 13-be0 Series Maintenance And Service Manual

Heat sink

To remove the heat sink, use this procedure and illustration.
Table 5-8 Heat sink descriptions and part numbers
Description
Heat sink
Before removing the heat sink, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the heat sink:
1. Remove the foam pad from the system board (1).
2. In the order indicated on the heat sink, remove the four Phillips M2.0 × 4.0 screws (2) that secure the
heat sink to the system board.
3. Remove the heat sink (3).
38 Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page 29).
Spare part number
M52815-001
29).
Battery on page 31).