Fingerprint Reader; Fan - HP 13-be0 Series Maintenance And Service Manual

Fingerprint reader

To remove the fingerprint reader, use this procedure and illustration.
Table 5-7 Fingerprint reader description and part number
Description
Fingerprint reader, natural silver
Fingerprint reader, ceramic white
Fingerprint reader, pale rose gold
Fingerprint reader, warm gold
Fingerprint reader cable
Before removing the fingerprint reader, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the fan (see
5. Remove the system board (see
Remove the fingerprint reader:
1. Disconnect the fingerprint reader cable to the system board (1).
2. Remove the Phillips M2.0 × 2.0 screw (2) that secures the fingerprint reader bracket to the computer.
3. Remove the bracket from on top of the fingerprint reader (3).
4. Remove the fingerprint reader from the computer (4).
Reverse this procedure to install the fingerprint reader.

Fan

To remove the fan, use this procedure and illustration.
Preparation for disassembly on page
Bottom cover on page
Battery on page 31).
Fan on page 37).
System board on page
29).
42).
Component replacement procedures
Spare part number
M52794-001
M52795-001
M52796-001
M52797-001
M52810-001
29).
37