Touchpad - HP 13-be0 Series Maintenance And Service Manual

Touchpad

To remove the touchpad, use this procedure and illustration.
Table 5-6 Touchpad description and part number
Description
Touchpad, natural silver
Touchpad, ceramic white
Touchpad, pale rose gold
Touchpad, warm gold
Touchpad cable
Before removing the touchpad, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the touchpad:
1. Disconnect the touchpad cable from the ZIF connector on the touchpad (1).
2. Remove the rubber piece that covers the middle screw (2).
3. Remove the three Phillips M2.0 × 2.0 screws (3) that secure the touchpad to the computer.
4. Lift the top of the touchpad up to about 45° (4), and then pull the touchpad into the computer to remove
it (5).
Reverse this procedure to install the touchpad.
36 Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
Battery on page 31).
29).
Spare part number
M52799-001
M52800-001
M52801-001
M52802-001
M52811-001
29).